The laser wavelength of the c♦≈arbon dioxide (CO2) laserλ¥< marking machine is 10.64um₩☆φ, which can be divided i✔✔÷nto two types: glass t"¶¥♥ube and radio frequency tube (RF tu‌φφ≤be is also called metal tu∞✔be). Mainly used for marking or ♠‌βcutting non-metallic materials such asε≤ wood, bamboo, acrylic,׶β paper, leather, cloth, etc. Below, ♠™★Foshan Fulan Laser mainly talks about &↑≥what to pay attention to when≠≤• using glass tube carbon dioxide lase™₹r marking.

1. Follow the safe operation r♠∏egulations. Operate strictly in acc↕‌ordance with the startup steps of←€ the equipment, and do not operat♦$∏e randomly;

2. Equipment operators mus±↑δt be trained to be familiar"×λ∏ with the structure and performa 'nce of the equipment, anε∏d master the relevant knowlβ ¶edge of the operating syst♠§♥em;

PS: Foshan Fulan Laser will c‌☆γδonduct professional one-on-one$∞εα training operations for customersα&®£. Training method: centra± γlized teaching, on-site ↓₩‍‌operation demonstration. ↔'∞Until the customer's oper¥™≈$ator can operate the equipment co×>rrectly and skillfully;

3. Wear protective glasses that €×¥£meet the requirements near the ≠÷‌™laser beam;

4. Do not use a CO2 l£ aser marking machine to process '©the marked product without knowi↑♥ng what material it is to avoid t✔♠π he potential hazards of smoke and v↓¶↔"apor;

5. When the equipment is in operation,✘π←© personnel shall not leave their posts ‍<₩without authorization or entrust untrai→₽♣ned persons to be taken care παof. If they do need to leave,₹α☆↔ they shall stop the mach±₽♠ine or cut off the power swi₽↔tch;

6. Turn off the laser <'or shutter when not processing;

7. Do not place flammable ♣÷♦materials near the unprotec¥γ¶ted laser beam;

8. The laser should be avoided to ca¥​∞use burns to the skin, ☆φ±•because the wavelength of the carbon ♥↓dioxide laser will b‌δ•&e absorbed by the skin, and the la™$ser beam will cause burns to♠$ the skin directly. However, as lα ong as the operation is proper, this♠"₽ situation can be completely av±®oided;

9. The laser and optica≈✔l lens are fragile, so they s¥↓"hould be handled with care to avoid vib®®$ ration; when installing and using, avo☆♠id local stress;

10. The cooling method÷→ is water-cooled. The cooα♥≥ling water must be pure, non-stickδ✘≠πy, and often replaced, preferably dist∑ε∏♣illed water; please β​note: it is strictly forbidden to ↑φ÷start the laser power supply ≠≈without water or withβ✔←' abnormal water circulation.