Does the laser marking machine ne ±±"ed to be equipped with a <∞chiller? The answer is: not necess★♣λarily.

Generally, the heat ¥"emitted by the laser is &≥•‌relatively large, and it✔✘♦← is necessary to use a watα✘er-cooled machine, such as: an o₩δ←δptical fiber machine, a carbon →'dioxide machine whose power ✘∑is above 50W, and an ultraviolet l​♠λδaser marking machine all need to use ​™φ≠a chiller to cool. However∞™, water cooling has a d​✘×rawback, that is, it i←××₩s relatively large. On the contrary©✔☆☆, the laser heat is not la'¥rge, and the air-cooled dev♠>♠ice can be used, which not only c☆™ondenses the volume of the e↔≠✘quipment, but also reduces the power♦® consumption of the equipment.

PS: Chiller is a kind≈¥£ of water cooling equ¶ ★∑ipment. The principl÷λe of the chiller is to inject a cert€Ωain amount of water into the i≤↔€nternal water tank o©± "f the machine, cool the water through ≥♣↕ the refrigeration system, and then i∏♣nject the cooling water&<∞ into the equipment that nee α'ds to be cooled by the internal w™→•←ater pump, and the cooling water will t€₹ake away the heat inside the machine. T♣•he high-temperature σ≠≤hot water is returned ♦γ★€to the water tank to cool down again, ↑ε←and the cooling is exchanged inγ§₩• this way to achieve the effect of c¥¥↕ooling the equipment. The correspo ♣Ω∑nding control device can control the☆← operation of the compressor refrigera∏™↔♥tion system according to © the set parameter requiremβπ©ents, so as to ensure that the λσφ cooling water temperat₽ ure of the equipment is♣≠£ always controlled within the speφ&↑cified range. To ensure &βthe stable and safe oper‌© ation of the equipment.