The laser marking machine is a fiΩ↔"↑ne marking equipment, but it can a ​lso be used for deep e£≥ngraving, but the engraving depth is rλ←¶elated to factors such a₩∑±¥s the absorption of the laser by th Ω♣φe engraved material, the power of  σ£the laser, and the action time of th≥₹✘♦e laser on the engraved materi©'÷Ωal. The method of using∞§♠ laser marking machine to mark th$ ₽$e depth: slow speed, low ≠•​frequency, high power, moder→§αate pulse width, use of small ✔'ε€format field lens, etc. to mark repeate→€​€dly. Deep engraving us≠₽ually takes a long time. And the ✔₩≤¶inner wall of the carving wi​γ₩ll have a taper. Therefore, the lase≤αr marking machine is not suit§→able for deep engraving.

If you need deeper engraving, it•€ is recommended that you purchase the∑©" laser deep engraving machine produced by Foshan Fulan Laser↕φγ.

The laser deep engraving machine  ₹​‌adopts advanced fiber resonance tech♠¶nology, which effectively impro↑λves the power densit±πδ←y and beam quality of the laser≥"←, so that the laser can qu€ ♥ickly sublimate the meε©γtal material into a gas in a sh ₽£‍ort time and reduce thα✘÷e thermal influence range, co☆≈mplete the marking process at one time,'§<  and With high repetitioλ♣n frequency, the border or outline λ♥>of fonts or graphics i∞"₽s more vertical, and₹₹ it has the characteristic§φ•s of flat engraving bo​₩γ♥ttom, small taper, small→"≥ heat-affected area, and fa÷÷←πst speed.

Application: Suitable for dε®★eep carving of most meta×π≤ls, such as: hardware products, p∑"£♠recision equipment, mold steel, ≈'common metals and allσγγ≠oys (iron, copper, aluminum, m γagnesium, zinc and all metals).

PS: The maximum marking range of t®β he conventional laser deep e♠"ngraving machine is 220×220mm, which •αmeans that the engraving range is≠≠<✔ 220mm long and 220mm wide and can b®γ‍e marked at one time. If it <₹±↔exceeds this range, it needs '←to be divided into several times to co÷€mplete the marking. Man→§±ually moving the markinσ®'☆g workpiece or equipment to align the s&¥plicing position is not only time-cons↔εσuming, but the position o₹↓≤f the splicing place is not>©® accurate enough. Therefore, if yo<§Ωu need to mark a large par ↔t, it is recommended that you c←β♣hoose one developed by Fulan→÷✘ Laser Non-standard equ​∞ipment-large-format laser deep eπ§ngraving machine. If this equipment sti>δγll cannot meet your requirements, $×♥✘Foshan Fulan Laser has β€♦ a professional R&D tea↓± ©m that can tailor a device that sui¶♠'≈ts you.